Vision prototype photo

Vision prototype photo
This is the Vision prototype designed/built by Steve Rahm in USA. and still being supported by Pro Composites Ltd. in USA. The aircraft is a 2 seat side by side, scratch built from a series of manuals. Built entirely of fiberglass and carbon cloth material the builder needs to know or learn some of the easy basics of composite construction. Building began Feb. 1998 in my spare time with 7 years where no building was possible. Building Hours at February 28, 2022: 4248.--------------------------------------------------------------------------------------------------------------------------------Some short videos of flights are at: https://www.youtube.com/channel/UCfxJXIwvmfNlNF3gwplFw7Q

Sunday, February 27, 2022

February 2022

 February 27/22

Installed the Fire extinguisher and First Aid kit and screwed the belly panel back into place.  I spent a day  draining and redoing six brake line fittings which had been weeping very slightly over a month.  At first I was going to just leave it but it kept nagging at me.  I didn't want any type of leaks, especially leaks in hard to reach locations, so was well worth the work of draining and fixing.  I installed the Control stick and wired in the PTT button.   Placed a hose clamps on the static vents, pitot hose line and the fuel air vent lines.  Tested the pitot and static lines for no leaks.  Using the computer and Avery label (sticky back and clear) sheets I made up all the required Placards required for the interior and exterior of the aircraft.  I then used a Label maker to make up all of the placards for switches and fuses on the panel.







at

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)