Vision prototype photo

Vision prototype photo
This is the Vision prototype designed/built by Steve Rahm in USA. and still being supported by Pro Composites Ltd. in USA. The aircraft is a 2 seat side by side, scratch built from a series of manuals. Built entirely of fiberglass and carbon cloth material the builder needs to know or learn some of the easy basics of composite construction. Building began Feb. 1998 in my spare time with 7 years where no building was possible. Building Hours at February 28, 2022: 4248.--------------------------------------------------------------------------------------------------------------------------------Some short videos of flights are at: https://www.youtube.com/channel/UCfxJXIwvmfNlNF3gwplFw7Q

Wednesday, September 13, 2017

Wing Root and Belly panels


The belly panels have been fabricated and glassed with two layers of bid.  Similar to the top root fairing panels two layers of poster board were attached, then covered in packing tape and duct tape as release agent prior to the fiberglass.  The fiberglass is yet to be removed so the poster board can be removed underneath.  Panels will be trimmed and attached.
The Leading edge cuff of the wing root fairings has also been completed with 2 bid.  These wing root fairings will all require some fill to get them nice and smooth.

No comments:

Post a Comment